面向电网实时运行风险的快速定级方法研究及应用

为满足电网运行实时风险评估时效性要求,解决电网运行实时风险评估与定级中效率与精度两者间协调的问题,在当前国家和主要电网企业规定的电网运行事故定级标准基础上提出了一种快速定级方法。快速定级方法充分考虑了电网运行实际特性,采取数据治理和算法重构两方面主要措施,对原判定方法进行优化处理。通过数据治理,大幅降低了对外部数据的依赖性,并取消了部分不必要的输入数据。采用算法重构,进一步将运行风险定级与实际业务流程紧密联系。以该快速定级方法为核心,构建了支撑电网运行风险分析与事故处置的实时运行风险管理系统,介绍了该系统的功能框架与系统架构。最后结合该系统在贵阳的实际应用情况,分析了快速定级方法的实际使用效益。     

油页岩矿物质催化半焦燃烧特性及机理

利用微型流化床反应分析仪（MFBRA）研究了油页岩矿物质催化半焦燃烧特性，重点考察了半焦内部矿物质和外部页岩灰床料对半焦燃烧的催化作用，揭示了流化床反应器中半焦燃烧过程和机理。结果表明：内部矿物质和外部床料对半焦燃烧均具有明显催化作用，而两者共同催化效果最为显著。矿物质中CaO和Fe₂O₃对半焦燃烧具有催化活性，CaO催化作用强于Fe₂O₃。油页岩半焦燃烧反应活化能在60.41~78.97 kJ/mol之间，矿物质的催化作用会明显降低反应活化能。流化床反应器中，矿物质对半焦燃烧的催化作用主要表现在四个反应，即：挥发分裂解和燃烧、半焦表面炭燃烧、半焦内部炭燃烧以及一氧化碳燃烧。     

Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

A fast experimental beam hardening correction method for accurate bone mineral measurements in 3D μCT imaging system

Bone mineral density plays an important role in the determination of bone strength and fracture risks. Consequently, it is very important to obtain accurate bone mineral density measurements. The microcomputerized tomography system provides 3D information about the architectural properties of bone. Quantitative analysis accuracy is decreased by the presence of artefacts in the reconstructed images, mainly due to beam hardening artefacts (such as cupping artefacts). In this paper, we introduced a new beam hardening correction method based on a postreconstruction technique performed with the use of off‐line water and bone linearization curves experimentally calculated aiming to take into account the nonhomogeneity in the scanned animal. In order to evaluate the mass correction rate, calibration line has been carried out to convert the reconstructed linear attenuation coefficient into bone masses. The presented correction method was then applied on a multimaterial cylindrical phantom and on mouse skeleton images. Mass correction rate up to 18% between uncorrected and corrected images were obtained as well as a remarkable improvement of a calculated mouse femur mass has been noticed. Results were also compared to those obtained when using the simple water linearization technique which does not take into account the nonhomogeneity in the object.     

海战场栅格节点的接入与迁移管理技术研究*

针对海战场作战平台中设备繁杂、异构的特点，栅格网络架构将各类作战平台设备以节点形式进行管理，但现有研究中尚缺乏具体的节点接入与迁移实现的流程方法与技术。论文针对上述问题，提出了海战场栅格节点接入与迁移的一种标准化流程与技术的实现方法，并利用仿真软件进行了实例的仿真验证，验证了节点接入与迁移标准化流程的可行性，并证明了其在技术上的可实现性。     

Robust Mapping for Mobile Robot Based on Immobile Area Grid Map Considering Potential Moving Objects

Mobile robots need Simultaneous Localization and Mapping (SLAM) for autonomous movement in human living environments. The occupancy grid map used in SLAM is a conventional method which makes a map by an occupancy probability in each grid. This method renews a map based on whether an object is observed or not. In order to remove moving objects from a map, an additional method is required. However, conventional methods deal only with actually moving objects, and potential moving objects (e.g., standing humans) are mapped as static objects. Furthermore, only binary states, used or not used, are given to each object in map updating. This paper proposes the immobility area grid map to represent a map by an immobility probability in each grid. The proposed method renews a map based on the identification of observed objects by a robot's sensors, in addition to whether an object is observed or not. We introduce the map update parameter, which is set adaptively from the certainty of identification result of the object. Observed objects can take continuous states, truly static—unknown—truly moving, according to the parameter value. Potential moving objects are not mapped if the parameter takes values corresponding to moving objects. The experimental results show robust mapping in dynamic environments including potential moving objects.     

Integrated smart grid systems security threat model

The smart grid (SG) integrates the power grid and the Information and Communication Technology (ICT) with the aim of achieving more reliable and safe power transmission and distribution to the customers. Integrating the power grid with the ICT exposes the SG to systems security threats and vulnerabilities that could be compromised by malicious users and attackers. This paper presents a SG systems threats analysis and integrated SG Systems Security Threat Model (SSTM). The reference architecture of the SG, with its components and communication interfaces used to exchange the energy-related information, is integrated with the results of SG systems security threat analysis to produce a comprehensive, integrated SG SSTM. The SG SSTM in this paper helps better depict and understand the vulnerabilities exploited by attackers to compromise the components and communication links of the SG. The SG SSTM provides a reference of the systems security threats for industrial security practitioners, and can be used for design and implementation of SG systems security controls and countermeasures.     

探讨加强质量监督管理提高电网安全水平

电网的安全水平主要取决于其使用产品的质量是否过关。如果产品的质量较好，则能建造出优质的电网，电网的安全水平便会随之提高。因此，应加强对产品质量的监督管理，从而提高电网的安全水平。我们可建立质量监督管理系统，及时抽检出质量不过关的产品，从而消除电网运行过程中潜在的安全隐患。